CAP BALANCER Spring Assisted Type



The heavy lid can be opened and closed easily and safely.
Please select the appropriate model from the FM type, FL type, BG type, BX type according to the torque of the lid.


 

Model FM

Model Suitable torque range of lid
N.m(kgf.mm)
Weight of product(kg) Materials
FM-8 60-90(6100-9200) 10.0 SUS304 and SCS13(except springs and bearings)
FM-13 90-140(9200-14300) 10.3 ditto
FM-18 140-170(14300-17300) 10.8 ditto
FM-22 170-210(17300-21400) 11.6 ditto

*The above torque range is a standard for model selection. The suitable model of balancer is different depending on the characteristics of the lid (height of the center of gravity etc.) and the desired operability by user.

Model FL

Model
Suitable torque range of lid
N.m(kgf.mm)
Weight(kg) material
FL-29 210-270(21400-27500) 20.0 SUS304 and SCS13 (except springs and bearings)
FL-29P same as FL-29 23.4 SUS304 and SCS13 (except springs, bearings and sealings)
FL-35 270-325(27500-33100) 20.4 SUS304 and SCS13 (except springs and bearings)
FL-35P same as FL-35 23.8 SUS304 and SCS13 (except springs, bearings and sealings)
FL-42 325-400(33100-40800) 22.4 SUS304 and SCS13 (except springs and bearings)
FL-42P same as FL-42 25.6 SUS304 and SCS13( (except springs, bearings and sealings)

*The above torque range is a standard for model selection. The suitable model of balancer is different depending on the characteristics of the lid (height of the center of gravity etc.) and the desired operability by user.

*About FL-29P, FL-35P, FL-42P, refer to the waterproof type "Precautions with the operating environment".Waterproof type external dimensions are different from general type.

Model BG

Model Suitable torque range of lid
N.m(kgf.mm)
Weight(kg) Materials
BG-60 400-600(40800-61200) 47.0 SUS304 and SCS13  (except springs and bearings)
BG-60P same as BG-60 47.0 SUS304 and SCS13 (except springs, bearings and sealings)
BG-75 600-730(61200-74400) 48.0 SUS304 and SCS13 (except springs and bearings)
BG-75P same as BG-75 48.0 SUS304 and SCS13 (except springs, bearings and sealings)

*The above torque range is a standard for model selection. The suitable model of balancer is different depending on the characteristics of the lid (height of the center of gravity etc.) and the desired operability by user.

*About BG-60P,BG-75P, refer to the waterproof type "Precautions with the operating environment".Waterproof type external dimensions are different from general type.


 

Model BX

Model Suitable torque range of lid
N.m(kgf.mm)
Weight(kg) Materials
BX-100 730-1020(74400-104000) 68.0 SUS304 and SCS13  (except springs and bearings)
BX-125 1020-1200(104000-122000) 70.0 ditto

*The above torque range is a standard for model selection. The suitable model of balancer is different depending on the characteristics of the lid (height of the center of gravity etc.) and the desired operability by user.

Precautions with the operating environment


There is a risk of the inner spring corroding in an environment where the balancer is frequently cleaned and/or corrosive gas is generated. When using a CAP BALANCER in this environment, please use a totally waterproof type 'FL-P', 'BG-P' or 'Free stop Cap Balancer'.
 

防水型キャップバランサー

(waterproof type)

The spring case is waterproofed by packing and oil seal.

 

Precautions with the operating 'Spring Assisted' model
Even when opening and closing the lid at the state where the spring has been set, slowly open and close the lid while holding its handle. The lid cannot be stopped at an arbitrary position (angle). Pay sufficient attention to avoid damaging your fingers during opening and closing operation.